位置>千里马招标网> 招标中心> 义乌吉利DHT数控淬火压床项目项目招标公告
您尚未开通该权限!
咨询客服:400-688-2000,掌握更多商机线索!
- 咨询:400-688-2000查看全部商机
(略)
项目招标公告
采购类别:设备类(注:新用户时请选择此类别,否则无法报名)
1.项目名称:(略)
2.项目概况与招标范围
2.1 项目描述
本项目设备用于义乌吉利变速器有限公司3DHT 1.0期项目中前、后行星机构齿圈及MEP齿圈;投标方负责设备及装备的安装调试,交付验收,达到验收标准要求,负责设备的售后服务及相关人员的技术培训,即交钥匙工程。
2.2招标范围:
序号No. | 名称Description | 数量/台Quantity per machine | 备注Note |
1 | 上、下料道 Upper and lower feed channels | 1 | 零件由料仓集中上、下料 The parts are con(略) and unloaded by the silo |
2 | 上下料机器人或桁架 Loading and un(略) robot or truss | 1 | 如果采用机器人,品牌ABB 、Kuka或同等品牌 If robots are used, brand ABB, Kuka or equival(略) |
3 | 淬火压床 Quenching press machine | 1 | / |
4 | 淬火介质加热、冷却装置 Quenching medium heating and cooling device | 1 | / |
5 | 淬火介质过滤装置 Qu(略) medium filter | 1 | / |
6 | 工件专用模具 Workpiece special mold | 2 | 每个产品(略) 2 sets of special molds for each pr(略) |
7 | 油雾处理系统 Oil mist treatment system | 1 | / |
2.3设备技术要求
2.3.1机床防护安全装置要齐全,其标准不得低于GB157(略)计制造应(略).01标准,机床所有零部件设计和各仪表的计量单位应全部采用国际单位(SI)标准。设备环保要求参照欧洲相关标准。The machines protective safety device must be complete and the standard requirement must not lower than the GB157(略)general technical conditi(略)of metal tu(略)machine safeties and European standard. Machines design should measure up to ISO international standard and BV1.01s(略)and all de(略)components of the machines and the measured units of each apparatus should all adopt international unit (SI) st(略). And the environmental requirement of the equipment see related European st(略).
2.3.2每台淬火压床具有独立的电器系统、气动系统、润滑系统和自动上下料系统;要求机床自动上下料及各(略)ent should have individual electric system、hydraulic system、(略)system、lubrication system and automatic loading/unloading sy(略)it is required the machine can be loading/unloading automatically and the parts are automatically moved between different process. If the machine fail to be au(略) running, it is necessary that this machine can be do all step by manually.
2.3.3整线需配备用电能耗计量表。
The electri(略) energy consumption meter of whole line needs to be equipped.
2.3.(略)条线需配HT8移动操作面板
The NC system of eq(略)must use Si(略)system 840Dsl;Supply mobile panel HT8 for each we(略) line.
2.3.5设备具有断电记忆功能
The device has a power-off memory function.l
2.3.6设备其他要求见附件1:(略)
For more detail requirement see attachment 1: equipment general requirement.
2.3.7 安全Safety
2.3.7.1在距离设备前后左右各1m处测量,空运转时不大于75dB,在切削或受载荷时不大于80dB。按标准DIN ****检测;
Respectively in(略)the noise on front, back, left, right of the machine with a distance of 1meter, and the noise of machine at idling run st(略)should be less than 75dB; the noise of ma(略) at cutting and loading status should be less than 80dB. The noise should be inspected according to DIN ****.
2.3.7.2设备设计制造的安全要求见欧洲相关标准和附件1“(略)”
Safety requirement of equipment in design and production see related European standard, requirement and attachment 1: equipment general requirement.
2.3.8 机床规格M(略) specification
2.3.8.1 上下料道:零件采用堆栈上料,上料数量至少保证能加工1小时。
Loading and unloading : The gears and ratchets are stacked and the loading is guaranteed to be at least 1 hour.
2.3.8.2 淬火压床:适用于最大外径(略),最大高度50(略),淬火压床自(略),机床可(略),自动将淬(略),淬火压床为(略),淬火工位内的基本工装装有自动锁紧和解锁系统,设备具备(略)(对于不符合参数的工件能够从不合格料道剔出)和记录存储(如:工件到达淬火(略),冷却时间,下压压力,淬火介质流量,淬火(略)),
Quenching press: suitable for quenching workpieces with a maximum outer diameter of 300mm and a maximum height of 50mm. The quenching press is automatically loaded onto the tooling. The machine tool can use an expansion mandrel or a fixed mandrel to automatically clamp the quenched workpiece from the basic tooling. Going to other stations, the quenching press is a semi-automatic tool changer. The basic tooling in the quenching station is equipped with an automatic locking and unlocking system. The equipment has the relevant data monitoring function for workpiece machining (for workpieces that do not meet the parameters, it can never Qualified material removal) and record storage (eg temperature when the workpiece reaches the quenching station, cooling time, pressing pressure, quenching medium flow, quenching medium temperature, etc.),
2.3.8.3 淬火介质加热、冷却装置:该装置具备对淬火介质加热、冷却功能,使淬火介质温度恒定在一个范围内。同时具备对淬火介质过滤功能。
Quenching medium heating and cooling device: The device has the function of heating and cooling the quenching medium, so that the temperature of the quenching medium is constant within a range. Simultaneous filtration of quenching media
2.3.8.4 工件专用模具:(略)
Workpiece-specific molds: 1 for each type of special tooling.
4.3.5油雾处理系统:对于在压淬过程中产生的油雾必须收集处理,不允许直接排入室内。Oil mist treatment system: The oil mist generated during the pressure quenching process must be collected and processed, and it is not allowed to be discharged directly into the room.
2.3.9 夹、辅具Fixtures and auxilia(略)
2.3.9.1所有工件的卡紧装置必须设计为快速切换型;
All clamping settings for workpiece must be designed as quick-switch type。
2.3.9.2全部卡紧和固定系统必须防雾防尘;
All the clamping and locating system must be mist and dust-pr(略)。
2.3.9.3具有压力报警功能,机床夹紧油缸带位移判别装置,保证工件不夹紧不能工作;
The ma(略)has the pr(略)alarm fu(略)and grip cylinder has deviation discriminating apparatus to ensure unclamped workpiece un(略)to be pr(略).
2.3.9.4夹、辅具数量Clamping fixture quantity
所有夹具及夹具备件随机交付。All fixtures be delivered with the machine.
2.3.9.5所有的夹具需(略)。All fixtures sh(略) be marked with fixture No. which is provided by bidder.
2.3.10 可视化要求:所有的油液管路必须标明流动方向,压力表需用黄绿红标出正常工作范围(略);
Visualization requirement: All the oil fluid pipes must be clearly marked with the moving direction, pressure meter marked with yellow/ green/ red color respectively when under normal working range/ lower than working range or exceed the working range, meanwhile dangerous areas of machine should be also marked out. For more details, please seeBV1.01
2.3.11人机工程:上下料操作高(略)要求详见BV1.10(略).25标准要求;
Ergonomic: operation height for loading/unloading workpiece should be between 900-****mm;other requirements please see BV1.10 and (略)
2.3.12 防错:设备需要有防错功能,可以对零件放反、未放正或未放正确的零件等进行防错;二次加工等进行防错。
Mistake proofing: The machine shall be equipped with mistake proofing function, it can avoid wrong workpiece and/or wrong position like reverse position/ skew position etc.
2.3.13 机床颜色:机床主体颜色为RAL ****;其他颜色参考,详细要求见附件9:设备通(略)。
Machine color : The color of main body should be RAL ****。For other color references, for more details please see Attachment 9:Equipment general color te(略)req(略).
2.3.14 设备有维护保养预警功能
The equipment has maintenance warning fu(略).
2.3.15 MES:设备所有工位应具有数据备份和网络(略)S系统要求;
MES: The machine’s data interfaces can be copied by CIF and USB and can meet with special character save requirement. All machines can be contacted to internet or network; for more details please see Attachment 1: General equipment technical condition.
2.3.16为了便于设备管理,乙方需要提供EKS权限管理系统,3级或以上的不同权限,分别为操作权限,调试权限,维护权限.同时配(略)。
In order to better management, we quote EKS privilege management system,3 level privilege or ab(略) for operator,installation, and maintenance. At the same time equipped with two sets of keys.
2.3.17其他Other
2.3.17.1 在距设备前后左右各1m处测量,空运转时不大于75dB,在切削和受载荷时不大于80dB。按标准DIN ****检测;
Respectively inspect the noise on fr(略)back, left, right of the machine with a di(略)of 1meter, and the noise of machine at id(略)run status should be less than 75dB; the noise of machine at cutting and lo(略)status should be less than 80dB. The noise sh(略) be inspected according to DIN ****.
2.3.17.2 机床采用全防护结构;全部卡紧和固定系统必须防雾防尘。
All the clamping and locating system must be mist and dust-proof.Ma(略)must adopt fully(略) structure.
2.3.17.3配置自动润滑系统,应设润滑监控(略)。润滑系统故障时,设备在完成当前工作循环后自(略)
It should configure automatic lub(略)system and should set lubrication monitoring and status display. When lubrication sy(略)breaks down, the equipment will stop working autom(略) after accomplishing the current operating cycle.
2.3.17.4机床侧(略),前面主门要带安全锁;加工区域安有防水防油照明灯;
The machine has program-controlled automatic load/unload door on side, Front main door should be with safe lock. The processing area installed with water proof lamp.
2.3.17.5近3年至少3家同行业使用同类机型。
At least three same industries use similar type machine nearly three years.
2.3.17.6设备开动率≥96%,验证方法:连续生产三个班,计算(略)(计划开机时间-故障时间)/计(略)。
Equipment start rate ≥ 96%,Authentication methods: continuous product three classes, Calculate formula: (planned startup time - failure time)/planned startup time.
*2.3.17.7机床具备和开放编写加工程序的权限,且机床具备运行和存储20个以上的零件加工程序的存储空间及相关硬件。
The machine tool has the authority to write the processing program, and the machine tool has the storage space and related ha(略) for running and storing more than 10 parts processing programs.
*2.3.17.8设备控制系统为西门子系统
The equipment control system is Siemens system.
2.3.17.9设备电控柜需自带空调,模式:(略)
The ma(略) for must be installed air condition for electrical cabinet ,air to water
2.3.17.10投标方应为招标方提供不增加主要功能的软件免费升级;该项要(略)
Bidder should provide the free software upgrade without ad(略) main functions for Geely。But Part B has to do this job only when below two situation meet。
Siemens对软件进行了升级
如不升级软件,乙方在甲方的设备会遇到相应的问题无法用于甲方生产
Si(略) has updated the software
If Part B don’t up(略) the software for Part A, the machine from Part B in Part A’s plant will have corresponding problem and can’t be machining for Part A.”
3.投标人资格要求
3.1本次招标要求投标人满足如下资格条件:
3.1.1 ) 从业时间3年以上,成功承接过国内外类似项目不少于三例(须提供合同等证明资料)。
3.1.2 ) 国内外公司均可参加,具有独立法人资格和承担民事责任的能力
3.1.3) 具有良好的商业信誉和健全的财务会计制度
3.2本次招标(略)。
3.3原则上不接受具有关联关系的企业投标同一项目,若确需竞标同一项目,需向招标方报备。
4.投标报名
4.1报名方式
4.1.1 *凡有意参加报名的投标人,请至吉利集团招标采购平台(https://(略)com)注册报名,可在平台网站首页点击“下载供应商服务手册”查看《吉利电子采购招标平台操作手册(供应商端》,投标人根据手册要求进行注册,认证完成后为注册成功后。供应商根据公告项目名称,按照报名要求上传资料。未按照此方式报名的,视作无效报名。
4.1.2 *报名截止时间:(略)
4.1.3如无法在吉利集团招标采购平台完成注册的,可咨询在线客服进行反馈处理。
4.2报名资料
报名资料于报名截止时间前上传至吉利集团招标采购平台,报名资料包含但不限于以下内容:
a、三证合一的营业执照副本、安全生产许可证副本;
b、资质等级证书;
c、类似项目业绩证明及证明材料(提供合同扫描件,涉及机密部分可隐去);
d、企业概况及履约能力说明;
e、近三年的财务报表资料;
5.招标(略)
5.1报(略),对所有报名(略),初审合格后发放招标文件;
6.发布(略)
本次招标公告只在吉利集团招标采购平台(略)com上发布,其他媒体转载无效。
7.联系方式
招标人:(略)
招标人地址:(略)
开标地址:浙江省宁波市慈溪市杭州湾新区滨海二路818号
联系人:
(商务)
刘双伟 手机号 (略) E-mail: (略)
(技术)
孙小芽 手机号 (略) E-mail :
注:无论投标结果如何,投标人自行承担所有与参加投标活动有关的全部费用。
投诉、举报电话:(略)(集团招标管理部)
举报邮箱:(略)
单位:(略)
时间:(略)
注册会员享贴心服务
项目查询服务
·让您全面及时掌握全国各省市拟建、报批、立项、施工在建项目的项目信息
·帮您跟对合适的项目、找对准确的负责人,全面掌握各项目的业主单位、设计院、总包单位、施工企业的项目经理、项目负责人的详细联系方式
·帮您第一时间获得全国项目业主、招标代理公司和政府采购中心发布的招标、中标项目信息
项目定制服务
·根据您的关注重点定制项目,从海量的项目中筛选出符合您的要求和标准的工程并及时找出关键负责人和联系方式
·根据您的需要,向您指定的手机、电子邮箱及时反馈项目进展情况
- 猜你喜欢
- 更多南昌县招标采购信息
- 动力总成公司2019年线束采购项目
- 12月11日
- 凯悦汽车大部件制造(张家口)有限公
- 12月11日
- 凯悦汽车大部件制造(张家口)有限公
- 12月11日
- 浙江吉利控股集团有限公司余姚DMA
- 12月11日
- 浙江吉利控股集团有限公司山西吉利汽
- 12月11日
- 张家口基地入厂物流包装优化项目招标
- 12月11日
- 盐边县疾病预防控制中心医用冰箱及发
- 12月11日
- 吉林油田分公司(锅炉车部件)物资公
- 12月11日
- 大连电厂-锅炉专业#1炉冷再辅汽旁
- 12月11日
- 吉林油田公司免拆卸过滤器物资公开竞
- 12月11日
- 大连电厂-锅炉专业#4炉主蒸汽PC
- 12月11日
- 大连电厂-环保专业干灰及干渣磨损件
- 12月11日
-
南昌县建材网
南昌县采购信息网
南昌县政府公开信息
南昌县公共资源交易网
南昌县电力交易中心
南昌县交易中心
南昌县房产交易中心
南昌县工程交易中心
南昌县钢铁交易中心
南昌县建设交易中心
南昌县招投标交易中心
南昌县政府交易中心
南昌县造价信息网
南昌县市政工程信息网
南昌县水利工程信息网
南昌县通信工程信息网
南昌县医药招标网
南昌县建筑招标网
南昌县工程招标网
南昌县建设招标网
南昌县施工招标
南昌县装饰工程招标
南昌县建设工程网
南昌县水利招标信息网
南昌县电力招标网
南昌县建委招投标网
南昌县建筑管理网
南昌县建设信息港
南昌县教育招标网
南昌县装修招标
南昌县人力和社会保障局
南昌县建设网
南昌县总包工程
南昌县政府工程招标
南昌县工程施工招标
南昌县工程公开项目
南昌县工程采购信息
南昌县招标投标采购平台
南昌县省市工程建设网