位置>千里马招标网> 招标中心> 轧线在线表检仪变更公告(重新招标第1次)[变更公告]
您尚未开通该权限!
咨询客服:400-688-2000,掌握更多商机线索!
- 咨询:400-688-2000查看全部商机
(略)变更公告
变更说明投标文件递交截止时间由:2022年07月22日09时15分,变更为:2022年07月29日14时30分。
发布日期:(略)
招标编号:(略)E31-539
招标编号(国际招标网):(略)
(略)(以下称招标机构)受**钢铁集团有限公司(以下称买方)委托,就其(略)所需的下列货物进行公开招标,邀请合格投标人进行网上电子投标。
标段编号:(略)E31-539/05
标段名称:(略)
1.招标货物名称、数量、技术规格和资金来源:
招标货物名称:(略)
数量:(略)
技术规格:
*满足高线生产(略):生产规模:40万t/a;产品:Φ5~25mm光面盘卷;主要钢种:硬线钢、优质碳素结构钢、冷镦钢、焊接用钢、弹簧钢、管桩钢等。
*满足棒材生产线产品大纲:生产规模:56万t/a;产品:Φ20~90mm圆钢;主要钢种:优质碳素结构钢、合金结构钢、弹簧钢等。其中合金结构钢、轴承钢等品种考虑稀土钢。
*投标设备具有100%圆钢全表面检测,无盲区。
*投标设备必须具备自动检测重现性缺陷,并且自动报警、自动计算该重现缺陷节距、自动标示显示等功能。
*投标设备将(略)。记录中包括缺陷种类、大小、严重度、位置,并可保存缺陷照片。包括图片在内的所有表面缺陷数据将储存在据库或硬盘中,可从任何具有数据库连接访问功能的计算机读取显示。
*投标设备要求为进口先进机电一体品设备,除数据显示终端(略),其它设备均要求进口。
*检测设备必须具备可检测0.05mm开口裂纹的能力。投标人必须随机提供至少一支符合前述规格的样棒,其表面上有至少一条经过认证的开口度(宽度)/深度必须在0.05mm以下(含)的裂纹(可为人造缺陷),以验证基本检测能力。测量认证证(略)。
*纵向宽度(W): 0.05 mm;横向宽度(W):0.5 mm。
*检测率:(略)
*投标设备可检测各式表面缺陷,如裂纹、辊裂痕及其他横向和纵向表面缺陷。作为证明,投标人必须(略),以及经验证过的各类缺陷检测结果,需提供的经过验证的可检测缺陷类别样本集,图片分热态检测图像与表面清理后棒线材或相关设备数码照片。最少必须提出的类别如下:线缝裂纹(投标人必须(略),测试方法为磁粉或镦锻或金相)、重现性、折叠、划伤、过充满、翘皮、凹坑、结疤、晶格开裂、大开裂、颈缩、竹节等缺陷。投标人必须提供由其客户在设备正常使用条件下检测到的各种缺陷案例,须列明进行验证的客户名称。
*可实现0.05mm缺陷检出率90%;工艺指导作用重复性缺陷自动报警;投标设备必须具备自动检测重现性缺陷,并且自动报警、(略)。
具体详见技术文件
资金来源:(略)
2. 交货地点和交货时间:
交货地点:(略)
交货时间:(略)
3. *凡确认投标的投标人请登录宝华智慧招标共享平台,务必在开标前注册为其会员并通过年检以获得投标资格,中标情况(略)。
宝华智慧招标共享平台(https://(略)com)和中国招标投标公共服务平台(http://(略)com/)可同时提供我公司的招标项目信息(邀请招标除外),有兴趣的投标人可以登录查看。登录后,投标人可在宝华智慧招标共享平台在线购买招标文件,进行投标和开标活动。
4. 购买招标文件时间:(略)起到2022年07月21日止。
5. 招标文件售价:招标文件英文版及中文版一套(电子版),若中文和英文版有冲突以中文版为准。
1,500.00元人民币或(略).00美元整。
招标文件均按标(略),投标人成功购标后,自行下载招标文件和投标文件模板。招标文件一经售出不得退还。
6. 投标截止时间和开标时间:(略)4时30分(**时间)。投标人应于投标截止时间前在宝华智慧招标共享平台成功递交所有电子投标文件。
7. 开标方式:(略)
8. 开标地点:(略)
9. *对投标人的资格要求:
投标人在国内外近五年必须有类似工程的成功运行业绩。其中至少有2家及以上轧制速度超过100m/s高速线材成品检测业绩;有2家以及以上轧制速度超过16m/s棒材成品检测业绩;业绩经验必须涵盖新钢线棒材规格范围Φ5.0~90.0 mm。
10. 本项目不接受联合体投标。
11.招标人相关信息:
招标人联系人:(略)
招标人邮箱:
招标人电话:(略)
12. 未领购招标(略)。
13. 客服热线:(略) (有关投标人CA办理事项的咨询)
传 真:(略)
网上(略):具体操作方法详见宝华招标网“操作指南”。
项目经理:朱磊 (有关招标项目商务、技术问题可致电项目经理。)
电 话:(略)
电子邮件:(略)
业务咨询:
招标机构地址:(略)
购标时人民币付款采用第三方支付,外币付款可以汇款到相应外币账户内
开户银行(外币):(略)
收 款 人:(略)
账 号:
美元:(略)
Swift Code:(略)
On-line Surface De(略) for Rolling Line
Change the description
The dead line for submission of tender documentsis changedfrom 09:15 on July 22, 2022 to 14:30 on July 29, 2022.
Issue Date:(略)
Tendering No:(略)E31-539
Tendering No. (China International Bidding Website) No:(略)
Shanghai Baohua International Te(略)Co., Ltd.(Hereinafter referred to as Tendering Agency) is commissioned by XinSteel Group Co., Ltd.(Hereinafter referred to as tenderer) on Open Tendering for the following goods required in XinSteel Ener(略)and Environmental EAF Upgrade Relocation Renovation Worksinvites eligible bidders to online e-(略).
Bid section No:0721-(略)
Bid section Name:XinSteel Energy-Efficient and Environmental EAF Upgrade Relocation Renovation Works
1. The name, quantity, te(略) specifications and fund sources of goods for tendering:
The name:On-line Su(略) Detector for Rolling Line
Quantity:(略)
Technical specifications:
*High Speed Wire Rod Production Line Product outline: Production scale: 400,000t/a, Product: Φ5-25mm bright coil, Main steel grades: hard wire steel, high quality carbon structural steel, cold steel, steel for welding, spring steel, pipe pile steel, etc.
*Rod Production Line Product outline: Production scale: 560,000t/a, Product: Φ20-90mm round steel, Main steel grades: high quality carbon structural steel, structural alloy steel, spring steel, etc. Rare earth steel is considered for structural alloy steel and bearing steel.
*The tender eq(略)shall be able to in(略) 100% of the full surface of the round steel, without blind spots.
*The tender equipment shall be able to automatically detect reproducible defects and have functions such as automatic al(略) automatic calculation of the pitch of the reproducible defect and automatic marking.
*The tender eq(略)shall be able to create the record of each surface de(略)including the type, size, severity and location of the de(略)and to save the photo(略)of defects. All surface de(略)data, including pi(略) shall be stored in a database or hard disk and can be read from any computer with database connection access.
*The tender equipment shall be imported state-of-the-art electromechanical product. All devices shall be imported, except for the data display terminal computer and cooling system which can be ho(略) products.
*The detection de(略)shall be able to detect 0.05mm opening cracks. The bidder shall pr(略)along with the equipment, at least one sample rod conforming to the aforementioned specifications with at least one ce(略)crack on its surface with an opening (width)/d(略) of 0.05mm or less (may be man-made defect) to verify the basic detection capability. The certification can be issued by the standards organization of the bidder's country or a department authorized by it.
*Longitudinal Width (W): 0.05 mm, Transverse Width (W): 0.5 mm.
*Detection rate: for the above defects, ≥ 90%.
*The tender equipment shall be able to detect all kinds of surface defects, such as cracks, roll cracks and other transverse and longitudinal surface defects. As the proof, the bidder shall provide installation photographs of the equipment it proposes, verified test results for each type of defect, and a sample set of verified categories of detectable defects. There are two types of images: thermal inspection images and digital photographs of wire rod or related equipment after surface cleaning. As a minimum, the following types shall be presented: seam crack (the bidder shall provide the verification test that detects seam crack, either by magnetic particle or upsetting forging or metallography), reproducibility, fold, scratch, overfill, warping, pit, scar, lattice crack, large crack, necking, bamboo knot and other defects. The bidder shall provide examples of various defects detected by its customers under normal conditions of use of the equipment, indicating the names of the customers conducting the verification.
*The tender equipment shall be able to ac(略)a detection rate of 90% for 0.05mm defects and the automatic alarm for repet(略)defects. The te(略)equipment shall be able to automa(略)detect reproducible defects and have functions such as au(略) alarm, automatic calculation of the pitch of the reproducible defect and automatic marking.
See te(略) documents for details.
Fund sources of goods:(略)
2. Delivery time and place:
Delivery place:(略)
Delivery time:
3. *The bidders who have confirmed to participate the bid must log on China International Bidding Website (http://(略)com), and register. Please make sure you have registered and passed through the annual review before bidding. The awarding will be publicized on China International Bidding Website.
Baohua E-bidding website (http://(略)com) and China Tendeing Bidding Public Service Platform (http://(略)com) could also provide the information about tendering project of our company (except invitation of tendering), interested bidders may login to view relevant information. After login, the bidder could purchase tendering document and bid online.
4. Time for purchasing Tendering documents: Starting from:(略) to 2022-07-21 (Beijing time).
5. Sales prices of the tendering document: One complete set of Tendering Documents both in English and Chinese ( electronic version included). The Chinese language shall govern in case of any discrepancy between Chinese language and the English language.Sales price is 1,(略)00USD
All tendering do(略)will be sold per bid package (or section). After purchasing the bid, the bidder can download the tendering document and the template of bidding document. The te(略) documents sales are non-refundable.
2022-07-29 14:(略)
7. Bid opening method :One-step of op(略)。
8. E-bid opening place:Bid op(略)hall on Ba(略)Intell(略)Bidding Integr(略) Platform。
9. *Requi(略) of Bidder’s qualification:
The bidder shall have the successful operation cases similar to the pr(略)at home and abroad over recent five years, including 2 and more cases of finished product test for hig(略)wire rods with the rolling speed of more than 10(略) 2 and more cases of finished product test for rods with the rolling speed of more than 16m/s. The cases shall cover the rod specification Φ5.0-90.0mm of XinSteel.
10. This project no conso(略)bi(略) is not accepted
11.Information about the tenderer:
Tenderer contact:(略)
Tenderer's mailbox:
Tenderer telephone:(略)
12. Tel:(略) (consulting for bidders CA affairs)
Fax:(略)
Online tendering document purchase: please refer to "HELP" for details on Baohua tendering website.
Bid manager:Zhu Lei (contact project leader for commer(略) technical problems of tendering project)
Tel:(略)
E-mail:(略)
Business assistant:
Tel:
Bid ag(略)ad(略):No.8, 550 Long KeShan Road, Bao Shan District,Shanghai, China
When purchasing the tendering document, the payment in RMB shall be made by the third party, and the pa(略)in foreign currency can be remitted to the corresponding foreign cu(略) account.
Bank ac(略)(Fo(略) currency):China Construction Bank, Baoshan Baosteel Branch
Benef(略):Shanghai Baohua International Tendering Co., Ltd.
Account Number:
USD:(略)
Swift Code: (略)
注册会员享贴心服务
项目查询服务
·让您全面及时掌握全国各省市拟建、报批、立项、施工在建项目的项目信息
·帮您跟对合适的项目、找对准确的负责人,全面掌握各项目的业主单位、设计院、总包单位、施工企业的项目经理、项目负责人的详细联系方式
·帮您第一时间获得全国项目业主、招标代理公司和政府采购中心发布的招标、中标项目信息
项目定制服务
·根据您的关注重点定制项目,从海量的项目中筛选出符合您的要求和标准的工程并及时找出关键负责人和联系方式
·根据您的需要,向您指定的手机、电子邮箱及时反馈项目进展情况
- 猜你喜欢
- 更多上海招标采购信息
- WTJJ22071500019沈阳
- 07月21日
- 信宜市人民医院查检系统采购项目招标
- 07月21日
- 重庆市南渝中学校天文望远镜采购网上
- 07月21日
- 伊东集团东兴公司烧碱、聚氯乙烯、水
- 07月21日
- 肇庆市建设工程质量检测站计量器具技
- 07月21日
- 武汉市农业科学院2022年度武汉市
- 07月21日
- 湖南中烟总部宽度仪等网购项目ZBW
- 07月21日
- 2022-2023年环境、公共卫生
- 07月21日
- 伊东集团东兴公司聚氯乙烯车间汞转型
- 07月21日
- 弛源分公司2022年7月仪电工程部
- 07月21日
- 研发中心以太网物理层测试设备采购公
- 07月21日
- 家禽主要疫病病原监测诊断和防控技术
- 07月21日
-
上海建材网
上海采购信息网
上海政府公开信息
上海公共资源交易网
上海电力交易中心
上海交易中心
上海房产交易中心
上海工程交易中心
上海钢铁交易中心
上海建设交易中心
上海招投标交易中心
上海政府交易中心
上海造价信息网
上海市政工程信息网
上海水利工程信息网
上海通信工程信息网
上海医药招标网
上海建筑招标网
上海工程招标网
上海建设招标网
上海施工招标
上海装饰工程招标
上海建设工程网
上海水利招标信息网
上海电力招标网
上海建委招投标网
上海建筑管理网
上海建设信息港
上海教育招标网
上海装修招标
上海人力和社会保障局
上海建设网
上海总包工程
上海政府工程招标
上海工程施工招标
上海工程公开项目
上海工程采购信息
上海招标投标采购平台
上海省市工程建设网