位置>千里马招标网> 招标中心> 马钢冷轧总厂新建6#热镀锌机组-退火炉设备变更公告[变更公告]
您尚未开通该权限!
咨询客服:400-688-2000,掌握更多商机线索!
- 咨询:400-688-2000查看全部商机
马钢冷轧总厂**6#热镀锌机组-(略)变更公告
变更说明投标文件递交截止时间由:****年04月24日09时00分,变更为:****年04月25日09时00分。
发布日期:(略)
招标编号:****-****A007-B07-708
招标编号(国际招标网):(略)
(略)(以下称招标机构)受宝钢工程技术集团有限公司(以下称买方)委托,就其马钢冷轧总厂**6#热镀锌机组-(略)所需的下列货物进行公开招标,邀请合格投标人进行网上电子投标。
标段编号:(略)B07-708/01
标段名称:马钢冷轧总厂**6#热镀锌机组-(略)
1.招标货物名称、数量、技术规格和资金来源:
招标货物名称:(略)
数量:(略)
技术规格:
(1)退火炉机械设备
1)最大工艺段速度:GI按180m/min设计,Al-Si 按150m/min设计。
2)退火炉最大加热能力按2.5mm*70m/min,退火炉温度780℃设计。
3)产能计算时不考虑汽车外板,但退火炉具备汽车外板生产能力。
4)快冷段需满足DP780/980/(略)用喷气冷却,氢气浓度由投标方确定。
5)快冷后TDS段配置炉内冷却器,用于DP780/980/****工艺路径1,将带钢从快冷出口520℃冷却至460℃,快冷出口至TDS冷却器前带钢保温时间≥8s。
6)DP78(略),按工艺路径1考虑。退火炉内配置感应加热器,用于DP780/980/****工艺路径2的生产。感应加热器功率****kW,并提供工艺路径2生产时的规格速度表,感应加热器耐温等级需按铝硅产品设计。
7)辐射管加热段设置独立的氧化腔室,氧化腔室(略)。设计需保证氧化腔室内气氛良好的均匀性及与其他炉体之间的密封性。
8)辐射管加热段及均热段各腔室设置独立的加湿器及露点检测探头,实现露点自动控制功能。
9)带钢均热温度(略),带钢冷却温度控制精度必须达到目标温度±5℃。
10)对于所有钢种的(略)。
11)退火炉应采用先进、成熟、可靠、符合环保要求的工艺技术和设备。在保证产品大纲规定的前提下,其产品质量、能源(略)准。
12)(略)由预热段、辐射管加热段(含氧化腔)、均热段、缓冷段、快冷段、热张紧辊室、炉鼻子组成。
(2)电气仪表自动化和工业电视设备
1)传动采用全数字式矢量控制和V/F控制、AC恒速控制的交流调速方式。
2)自动化系统,采用高速可靠的网络系统,开放式的人机界面系统(HMI)。
3)采用先进的、可靠的电加热设备。
4)配置(略)。
5)常规控制要求配置有温度、压力、流量、液位和电导率等仪表。
6)(略)测等仪表。
7)炉子通过PLC控制系统实现自动控制。
8)采用(略)。
9)所提供的硬件、(略),并提供正版授权。
10)在退火炉必要位置上配置工业电视高温摄像装置,信号在操作室(略),监视器(略)。
11)退火炉PLC与BCU之间的通信,要求采用P(略)。
(3)其他技术参数详见招标文件(技术部分)。
资金来源:(略)
2. 交货地点和交货时间:
交货地点:关境外设备: CIF**港 ;关境内设备:马钢股份冷轧总厂项目现场
交货时间:境外设备:最终一批设备从合同生效起 16个月交货完成(分批交货)(FOB装运港);关境内设备:最终一批设备从合同生效起 16个月交货完成(分批交货)(DDP 货到现场)
3. *凡确认投标的投标人请登录宝华智慧招标共享平台,务必在开标前注册为其会员并通过年检以获得投标资格,中标情况将在宝华智慧招标共享平台公示。
宝华智慧招标共享平台(https://(略)com)和中国招标投标公共服务平台(http://(略)com/)可提供我公司的招标项目信息(邀请招标除外),有兴趣的投标人可以登录查看。登录后,投标人可在宝华智慧招标共享平台上购买招标文件进行投标和开标活动。
4. 购买招标文件时间:****年04月04日起到****年04月12日止。
5. 招标文件售价:招标文件英(略)(电子版),若中文和英文版有冲突以中文版为准。
2,000.00元人民币(略).00美元整。
招标文件均按标段进行计价出售,投标(略),自行下载招标文件和投标文件模板。招标文件一经售出不得退还。
6. 投标截止时间和开标时间:****年04月25日09时00分(**时间)。投标人应于投标截止时间前在宝华智慧招标共(略)
7. 开标方式:(略)
8. 开标地点:(略)
9. *对投标人的(略):
(1)未被国家企业信用信息公示系统((略)gov.cn)列入严重违法失信企业名单;
(2)未被“信用中国”网站((略)gov.cn)列入失信被执行人名单;
(3)由于项目复杂,技术要求高,任何投标人希望参与本项目的,均应在开标前与招标人联系开展技术交流并签订技术协议,未能签订技术协议的投标人,其投标将被否决。技术协议现场签订联系人:骆洪亮((略))。若签订的技术协议与招标文件有差异时,以招标文件为准。
(4)本项目不接受代理商投标。
10. 本项目接受联合体投标。
11.招标人相关信息:
招标人联系人:(略)
招标人邮箱:(略)
招标人电话:(略)
12. 未领购招标文件的不得参加投标。
13. 客服热线:(略) (有关投标人CA办理事项的咨询)
传 真:(略)
网上(略):具体操作方法(略)。
项目经理:唐王忆 (有关商务、技术问题或招标文件异议可致电项目经理。)
电 话:(略)
电子邮件:(略)
业务咨询:
招标机构地址:(略)
购标时人民币付款采用第三方支付,外币付款可以汇款到相应外币账户内
开户银行(外币):(略)
收 款 人:(略)
账 号:
美元:(略)
Swift Code:(略)
Maanshan Iron Steel Company Limited New 6# CGL Project Annealing Furnace Equipment
Change the descrip(略)
Deadline for bid submission and Bid Opening Time has been changed from 09:00 on April 24, **** to 09:00 on April 25, ****.
Issue Date:(略)
Tendering No:(略)B07-708
Tendering No. (China International Bidding Website) No:(略)
Shanghai Baohua International Tendering Co., Ltd.(Herei(略)referred to as Tendering Agency) is comm(略)by Baosteel Engineering Technology Group Co., Ltd.(Hereinafter referred to as te(略)) on Open Te(略)for the fo(略)goods required in Maanshan Iron Steel Company Li(略) New 6# CGL Project Annealing Furnace Equipmentinvites eligible bidders to online e-bidding.
Bid section No:(略)B07-708/01
Bid section Name:Maanshan Iron Steel Company Limited New 6# CGL Project Annealing Furnace Equipment
1. The name, qu(略)te(略)specifications and fund so(略)of goods for te(略):
The name:Annealing Furnace Equipment
Quantity:(略)
Te(略) specifications:
(1)Mechanical eq(略)
1)The max process speed: GI:180m/min, Al-Si:150m/min.
2)The maximum heating ca(略)of the an(略)fu(略)is designed to be 2.5mm 70(略) at 780 ℃.
3)When calculating production capacity, the outer panel sheet is not considered, but the annealing furnace has the capacity to produce outer panels sheet.
4)The rapid cooling section needs to meet the cooling rate re(略)for process path 2 of DP780/9(略).The hydrogen conce(略)is determined by the se(略).
5)After rapid cooling, the Exit se(略)is eq(略)with an gas cooler for DP780(略) process path 1, which cools the strip from 520℃ to 460℃. The holding time of the strip from the rapid cooling outlet to the TDS gas cooler is ≥8 seconds.
6)When calculating the production capacity of DP780~DP****, it should be considered according to pr(略)path 1. The annealing furnace is equipped with an induction he(略)for the production of DP780/980/**** pr(略)path 2. The power of the induction heater is ****kW, the bi(略)supply the production table of DP7(略)pr(略)path 2, and the tem(略)resistance level of the induction he(略)needs to be designed according to the alumi(略) product.
7)An independent oxidation chamber is equipped in the heating section , the oxidation chamber has two functions: oxygenation and humidification. The design needs to ensure good uniformity of the atmosphere in the oxidation chamber and good tightness form other chambers.
8)Each chamber of the heating section and soaking section is equipped with an independent humidifier and independent dew point detector to realize the automatic control function of dew point.
9)The soaking temperature control accuracy of strip steel must reach the target temperature ±5°C, and the co(略) temperature control accuracy of strip steel must reach the target temperature ±5°C.
10)The cooling rate must be continuously adjustable for all steel grades.
11)The process technology and equipment adopted in the annealing furnace and alloying furnace should be advanced, mature, reliable and meet the environmental protection requirement. (Note: can produce GI and Al-Si products). Under the premise that the product program can be ensured, the technical and economic indicators such as quality of products, consumption of energy media and auxiliary material should reach the advanced level of the lead company's criterion in the world.
12)The annealing furnace equipment is composed of a pre(略)section, a ra(略)tube heating se(略)(including an oxidation chamber), a soaking se(略)a slow cooling section, a rapid cooling section, Exit se(略) and a furnace snout.
(2)Electrical, instrument, computer and ITV of annealing furnace
1)The elec(略)drives ad(略)full digital vector control, V/F control and AC co(略) speed control.
2)The three-electric integrated automation system adopts a high-(略)and reliable ne(略) system and an open human-machine interface system (HMI).
3)Adopt advanced and reliable electric heating equipment.
4)Configure the accident power supply.
5)Conve(略)control requires ins(略)for temperature, pressure, flow, level, and con(略).
6)The detection require(略)are equipped with radar CPC, tension de(略)pyrometer, scanning pyrometer, flame monitoring and control sy(略) oxygen, hydrogen, dew point, CO detection and other instruments.
7)The fu(略)co(略) is automatically controlled by the PLC control system
8)Furnace mathematical model sh(略)be su(略)
9)The hardware, system software, inter(略)so(略)and application software provided should be mature and reliable.And genuine aut(略)sh(略) be provided.
10)The industrial high-temperature camera device is equipped in the necessary position of the annealing fu(略)and the signal is displayed on the corresponding monitor in the operation room, the mo(略)does not belong to the the bi(略) scope of supply.
11)The communication between the annealing furnace PLC and the BCU requires the Profinet communication protocol.
(3)Other technical para(略) are detailed in the technical section of the bidding documents.
Fund sources of goods:(略)
2. Delivery time and place:
Delivery place:Offshore equipment: CIF Shanghai Port;Equipment in customs:Masteel Project site
Delivery time:Offshore equipment:The final batch of equipment shall be delivered within 16 months from the effective date of the contract(delivery by installment)(FOB Port of Sh(略));Equipment in customs:The final batch of equipment shall be de(略)within 16 months from the ef(略)date of the contract(delivery by insta(略)) (DDP goods to the site)
3. *The bidders who have confirmed to participate the bid must log on China International Bidding Website (http://(略)com), and register. Please make sure you have registered and passed through the annual review before bidding. The awarding will be publicized on China International Bidding Website.
Baohua E-bidding website (http://(略)com) and China Tendeing Bidding Public Service Platform (http://(略)com) could also provide the information about tendering project of our company (except invitation of tendering), interested bidders may login to view relevant information. After login, the bidder could purchase tendering document and bid online.
4. Time for purchasing Tendering documents: Starting from:(略)o (略)Beijing time).
5. Sales prices of the tendering document: One complete set of Tendering Documents both in English and Chinese ( electronic version included). The Chinese language shall govern in case of any discrepancy between Chinese language and the English language.Sales price is 2,(略)00USD
All tendering documents will be sold per bid package (or section). After purchasing the bid, the bidder can download the tendering document and the template of bidding document. The tendering documents sales are non-(略).
****-04-25 09:(略)
7. Bid opening me(略) :One-step of opening。
8. E-bid opening place:Bid opening hall on Baohua Intelligent Bidding Integrated Platform。
9. *Requirements of Bidder’s qualification:
(1)Not included in the list of seriously illegal and dishonest enterprises by the National Enterprise Credit Information Publicity System ((略)gov.cn);
(2)Not included in the list of persons subject to enforcement for trust-breaking on the website of Credit China ((略)gov.cn);
(3)Given the complexity and high technical requirements of the project, any bidder wishing to participate in the project shall have technical exchange meetings and sign technical agreements with the Tenderee before bid opening. If the bidder fails to sign a technical agreement, its bid will be rejected. If there is any difference between a signed technical agreement and bidding document, bidding document shall prevail. (Contact person of Baosteel Engineering Technology Group Co., Ltd.: Luo Hongliang (略));
(4)This project does not ac(略) agent bids.
10. This project no con(略) bidding is accepted
11.Information about the tenderer:
Tenderer contact:(略)
Tenderer's mailbox:(略)
Tenderer telephone:(略)
12. Tel:(略) (consulting for bidders CA affairs)
Fax:(略)
Online tendering document purchase: please refer to "HELP" for details on Baohua tendering website.
Bid manager:Tang wangyi (contact project leader for commercial, technical problems of te(略)project, or object(略)to te(略) documents)
Tel:(略)
E-mail:(略)
Business assistant:
Tel:
Bid agency address:No.8, 550 Long KeShan Road, Bao Shan District,Shanghai, China
When purchasing the tendering document, the payment in RMB shall be made by the third party, and the payment in foreign currency can be remitted to the corresponding foreign currency account.
Bank ac(略)(Foreign currency):China Construction Bank, Baoshan Ba(略) Branch
Beneficiary:Shanghai Baohua International Tendering Co., Ltd.
Account Number:
USD:(略)
Swift Code: (略)
附件:
注册会员享贴心服务
项目查询服务
·让您全面及时掌握全国各省市拟建、报批、立项、施工在建项目的项目信息
·帮您跟对合适的项目、找对准确的负责人,全面掌握各项目的业主单位、设计院、总包单位、施工企业的项目经理、项目负责人的详细联系方式
·帮您第一时间获得全国项目业主、招标代理公司和政府采购中心发布的招标、中标项目信息
项目定制服务
·根据您的关注重点定制项目,从海量的项目中筛选出符合您的要求和标准的工程并及时找出关键负责人和联系方式
·根据您的需要,向您指定的手机、电子邮箱及时反馈项目进展情况
- 猜你喜欢
- 更多新建县招标采购信息
- 宕昌县人民医院关于采购内部控制体系
- 04月03日
- 《大同盾石混凝土有限公司 办公楼前
- 04月03日
- 云南红塔滇西水泥股份有限公司202
- 04月03日
- 液压油-上海-QG24040201
- 04月03日
- 新疆医科大学第二附属医院第二住院楼
- 04月03日
- 环保和锅炉闸阀
- 04月03日
- 第一师医院2024年31部电梯维保
- 04月03日
- 物资管理部-瓦思巴轮-抓斗液压缸活
- 04月03日
- 中国地震科学实验场建设工程项目(四
- 04月03日
- 山东烟叶复烤有限公司沂水复烤厂电瓶
- 04月03日
- 视频展台(高清教学版)(含现场拆装
- 04月03日
- 中国地震科学实验场建设工程项目(四
- 04月03日
-
新建县建材网
新建县采购信息网
新建县政府公开信息
新建县公共资源交易网
新建县电力交易中心
新建县交易中心
新建县房产交易中心
新建县工程交易中心
新建县钢铁交易中心
新建县建设交易中心
新建县招投标交易中心
新建县政府交易中心
新建县造价信息网
新建县市政工程信息网
新建县水利工程信息网
新建县通信工程信息网
新建县医药招标网
新建县建筑招标网
新建县工程招标网
新建县建设招标网
新建县施工招标
新建县装饰工程招标
新建县建设工程网
新建县水利招标信息网
新建县电力招标网
新建县建委招投标网
新建县建筑管理网
新建县建设信息港
新建县教育招标网
新建县装修招标
新建县人力和社会保障局
新建县建设网
新建县总包工程
新建县政府工程招标
新建县工程施工招标
新建县工程公开项目
新建县工程采购信息
新建县招标投标采购平台
新建县省市工程建设网