各受邀报价单位:
因[POWERCHINA-****012-240031]****埃塞俄比亚
GEDA ****开发区输变电项目复合绝缘子采购项目需要,我司拟采用询比价采购方式进行下列货物的批量采购,请按以下要求于 2024 年 05 月 16 日 15 时
00 分前将报价文件上传至集采平台(http://ec.****.cn/)。在线填报金额必须与附件报价单一致,逾期系统将不予受理。
一、拟采购货物一览表 POWERCHINA-****012-240030
序号 | 描述 | 单位 | 采购量 | 备注 |
2.0 | TOWER GROUNDING | |||
All tower groundings including excavation, laying of counteroise, connection to towers including all clamps or other connections, corrosion protection, backfilling, compaction and measuring of ohmic value | ||||
3.1 | Basic grounding, consisting of three (3) ground rods 1m long and 5m counterpoise. | per tower | 8.00 | |
3.2 | Special grounding, 20 m lengths of ground wire including connectors. | per tower | 1.00 | |
3.0 | STEEL TOWERS | |||
Danger Phase Tower Number plates | each | 8.00 | ||
Aerial visible plates | each | 3.00 | ||
Tower circuit color plates | each | 8.00 | ||
5.0 | LINE CONDUCTOR INSULATORS AND FITTINGS | |||
Supply and installation of Insulators complete Sets of Fittings including all types of clamps, armor rods, extension links, pilot insulator sets, counterweights and all connectiones to Tower. | ||||
5.1 | Single Suspension insulator set for single ACSR "MALLARD" conductor including all clamps and fittings, armour rods and connections to tower, arcing device at both ends. | each | 0.00 | |
5.2 | Double Suspension insulator set for ACSR "MALLARD" conductor including all clamps and fittings, armour rods and connections to tower, arcing device at both ends. | each | 30.00 | |
5.3 | Single Tension Insulator set for ACSR "MALLARD" conductor including all connections to towers, clamps and fittings, armor rods arcing device at both ends. | each | 0.00 | |
5.4 | Double Tension Insulator set for ACSR "MALLARD" conductor including all connections to towers, clamps and fittings, armor rods arcing device at both ends. | each | 42.00 | |
5.5 | Jumper string as item 5.1 above, but without arcing horn | each | 12.00 | |
5.6 | Air Craft Warning Sphere | each | 0.00 | |
6.0 | OPGW FITTINGS AND ACCESSORIES | |||
Supply and installation of complete Sets of Fittings, including all types of clamps, extension links, armor rods, counterweights and all connectiones to Tower. | ||||
6.1 | Suspension set for OPGW | each | 5.00 | |
6.2 | Tension passing set for OPGW | each | 2.00 | |
6.3 | Tension double dead end down set for OPGW, to be installed on suspension tower | each | 0.00 | |
6.4 | Tension double dead end down set for OPGW | each | 0.00 | |
6.5 | Tension terminal dead end down set for OPGW | each | 5.00 | |
6.6 | Jointing Box for OPGW/OPGW, for use within the transmission line, including fixing, splicing and downlead clamps, with feed through sets, suitable for up to 72 SMF/ NZSDF fibres and OPGW, types as per specification | each | 2.00 | |
6.7 | Terminal Box for OPGW/FOC, for the connection at substation gantry, including fixing, splicing and downlead clamps, for up to 72 SMF/ NZSDF fibres and OPGW/FOC, types as per specification | each | 1.00 | |
Surplus OPGW Support | each | 3.00 | ||
Lead Down Fixture for OPGW | each | 70.00 | ||
7.0 | CONDUCTOR AND SHIELD WIRE | |||
Vibration dampers for conductor ACSR "MALLARD" | each | 84.00 | ||
Vibration dampers for OPGW | each | 28.00 | ||
Mid span joint for conductor ACSR "MALLARD" | each | 10.00 | ||
Repair sleeve for conductor ACSR "MALLARD" | each | 5.00 |
二、付款方式:
1、预付款:合同签订后,卖方提供合同总价的 10%预付款保函及 10%履约保函后,买方在 15 个工作日内卖方支付合同总价的 10%预付款。
2、交货付款:货物经买方出厂初步验收合格后,卖方将货物送到买方指定交货地点,货物报关发运后,买方以传真形式(或电子邮件)向卖方提供报关单复印件,卖方收到买方提供的报关单复印件后,严格按报关单内容在 5 天内开出合同全额增值税专用发票,同时卖方还要按合同要求提供所有单据,在收到规定合格单据后,卖方在 2 个月内支付合同金额的 80%发货款。
3、质保金:合同金额的 10%作为质保金,在质保期满后经使用方确认后支付合同总价 10%的货款。
三、报价要求:
1、含到**港或**港的车板交货价、含 13%全额增值税专用发票、包装费、国内运输费、保险费、商检费等。
2、设备质保期:质保期自货物到达国内指定**交货后 18 个月。
2、请注明交货期。
3、请注明报价有效期。
4、上传报价时请提供 PDF 版和可编辑版。
5、报价时提供详细技术参数。
6、本批次采购交货地点分为**港或**港。
7、报价需要提供铁塔荷载试验,详见铁塔技术要求。四、供货时间及地点:
交货地点:**港或**港买方某仓库;交货时间:2024 年 6 月 10 日前,或提供最短供货周期.
五、报价时间:本次采用中国电建集采平台进行询价,报名截止时间 2024
年 5 月 15日 15:00。该报价单作为后续合同谈判的主要依据,上述报价资料(报
价单、设备详细参数及配置等)请在 2024 年 5 月 16 日**时间 15:00 时前上传至集采平台(http://ec.****.cn/)。在线填报金额必须与附件报价单一致,逾期系统将不予受理。
六、包装要求:
6.1 货物的包装要符合国际海(陆)运输要求和我方货运代理的具体要求;若因包装原因造成的损失均由供方负责。
6.2 外包装箱上严格按合同上的唛头标记填写合同号、发货单位、外形尺寸等信息。
七、投标人资格要求
投标人必须满足以下全部资格要求:
1、****制造厂家,是在中国境内/外注册的企业法人,具有有效期内的 ISO9001 质量管理体系认证证书以及环境、职业健康认证证书,提供五年内两项类似产品不少于 5 万的合同证明材料。
2、投标人是增值税一般纳税人,能开具增值税专用发票。
3、投标人财务状况良好,近三年没有处于被责令停业,财产被接管、冻结、破产状态。
八、联系方式
招 标 人:****公司
地 址: ****开发区 3799 ****一局邮 编: 130000