开启全网商机
登录/注册
| Robosense M1 Plus 12V (with full attachments) | 1.0/个 | Robosense | M1 Plus 12V | ● Wavelength: 905nm (Class 1 Laser Safety) ● Measurement Range: Up to 200m (180m @ 10% reflectivity) ● Horizontal FOV: 120° ● Vertical FOV: 25° ● Angular Resolution (H x V): 0.2° x 0.2° (with Region of Interest (ROI) enhancement) ● Point Rate: 787,500 pts/s (single return), 1,575,000 pts/s (dual return) ● Frame Rate: 10 Hz / 20 Hz ● Range Accuracy: ±5 cm ● Operating Voltage: 9-36V DC ● Interface: 1000Mbps Ethernet ● Protection Level: IP67 | 1.质保3年 2.需要提供产品安装的相关技术支持文档。 3.按行业标准提供服务 | ||
| AWR2243-2X-CAS-EVM 4D Imaging Radar Evaluation Module | 2.0/个 | TI | AWR2243-2X-CAS-EVM | ● Frequency Band: 76 GHz to 81 GHz ● Configuration: Two-device cascaded array of AWR2243 chips. ● Antenna Array: Supports up to 6 Transmit (TX) and 8 Receive (RX) antenna elements. ● Virtual Channels: 48 virtual channels for high angular resolution MIMO. ● Key Features: Designed for automotive 4D imaging radar, supports long-range beamforming and beamsteering. ● Onboard Processor: Includes an AM2732R radar processor for data handling. ● Interface: Provides object data over CAN-FD or Ethernet. | 1.质保3年 2.需要提供产品安装的相关技术支持文档。 3.按行业标准提供服务 | ||
| MMWCAS-RF-EVM 4-chip Cascade Radar Board | 2.0/个 | TI | MMWCAS-RF-EVM | ● Configuration: Four-device cascaded array of AWR1243 or AWR2243 devices. ● Operation: A single master device distributes a 20-GHz LO signal, allowing the four devices to operate as a single RF transceiver. ● Antenna Array: Supports up to 12 Transmit (TX) and 16 Receive (RX) antenna elements. ● Key Features: Enables high signal-to-noise ratio (SNR) and superior angular resolution for imaging radar, long-range beamforming, and MIMO applications.[7][8] ● Required Pairing: Must be used with the MMWCAS-DSP-EVM (sold separately) for data capture and processing. | 1.质保3年 2.需要提供产品安装的相关技术支持文档。 3.按行业标准提供服务 | ||
| Cascade Imaging Radar DSP Evaluation Module | 2.0/个 | TI | MMWCAS-DSP-EVM | ● Processor: High-performance TDA2x SoC based on an enhanced OMAP architecture. ● Function: Provides the processing foundation for a cascaded imaging radar system, designed to work with the MMWCAS-RF-EVM. ● Accelerators: Features four radar processing SIMD accelerators (one EVE per connected AWRx device). ● Connectivity: Ethernet for control and PCIe for high-speed data transfer. ● Storage: Includes support for SSD storage for long-term data capture. ● Required Pairing: Designed to be the data capture and processing unit for the MMWCAS-RF-EVM. | 1.质保3年 2.需要提供产品安装的相关技术支持文档。 3.按行业标准提供服务 | ||
| Jetson AGX Thor Developer Kit (with 2T SSD) | 1.0/个 | NVIDIA | Jetson AGX Thor | ● Module: NVIDIA Jetson T5000 ● AI Performance: Up to 2070 TFLOPS (FP4, sparse). ● GPU: NVIDIA Blackwell architecture with 2560 CUDA cores and 96 fifth-generation Tensor Cores. ● CPU: 14-core ArmR NeoverseR-V3AE 64-bit CPU. ● Memory: 128 GB 256-bit LPDDR5X (273 GB/s bandwidth). ● Storage: Kit includes a 2TB NVMe SSD. ● Networking: Includes QSFP slot (4x25 GbE) and a Multi-GbE RJ45 connector. ● Power: 40W - 130W configurable power envelope. | 1.质保3年 2.需要提供产品安装的相关技术支持文档。 3.按行业标准提供服务 | ||
| Jetson AGX Orin Developer Kit (with 2T SSD) | 2.0/个 | NVIDIA | Jetson AGX Orin | ● AI Performance: Up to 275 TOPS (INT8). ● GPU: NVIDIA Ampere architecture with 2048 NVIDIAR CUDAR cores and 64 Tensor cores. ● CPU: 12-core Arm Cortex-A78AE v8.2 64-bit CPU. ● Memory: 32GB or 64GB 256-bit LPDDR5 (204.8 GB/s bandwidth). ● Storage: 64GB eMMC 5.1 (The request specifies a 2TB SSD, which would be added via an M.2 slot). ● Networking: RJ45 (up to 10 GbE). ● Power: 15W to 60W. | 1.质保3年 2.需要提供产品安装的相关技术支持文档。 3.按行业标准提供服务 |