开启全网商机
登录/注册
砂带、磨头等磨具类物资
招标详情
下文中****为隐藏内容，仅对千里马会员开放，如需查看完整内容请
「注册/登录」或 拨打咨询热线：
400-688-2000
| 招标单位 | **** | 项目名称 | 砂带、磨头等磨具类物资 |
| 质保期 | 报名截止日期 | ||
| 招标邮箱 | zhaobiao@nanshan.****.cn |
| 项目保证金 | 元 | 帐户名称 | **新南****公司 |
| 帐号 | 233****12142 | 开户行 | 中国银行****支行 |
| 备注 | |||
| 备注：竞价****公司转账，不支****银行柜台现金转账。 | |||
| 标书联系人 | 无 | 办公电话 | 无 |
| 邮件 | 无 |
| 账户名称 | 无 | 账号 | 无 |
| 开户行 | 无 | 行号 | 无 |
| 标书收费标准 | 地址、电话 | 无 | |
| 备注：****公司转账，不支****银行柜台现金转账。注明标书费的用途或投标项目名称。 | |||
| 砂带 | 80目(2100*50) | 200.00 | 条 | {"规格型号":"80目(2100*50)","材质":"陶瓷/纤维","外径/长度":"2100mm","内径/宽度":"50mm","高度":"/","结合剂":"/","硬度":"/","强度":"/","线速度":"/","最高转速":"/","目数":"80","特殊需求":"外观:色泽均匀,不能有毛刺,不得有裂纹和明显缺陷","执行标准":"GB/T 15305.3-2009","备注":"产品完好无破损，符合上述技术要求，附带合格证。不合格品处理标准;如到货不符合技术要求，由供应商无条件进行更换，退货。"} |
| 海绵抛光磨头 | 8*20*3 | 400.00 | 个 | {"规格型号":"8*20*3","材质":"磨料+橡胶+金属柄","外径/长度":"8mm","内径/宽度":"20mm","高度":"45-50mm","结合剂":"橡胶","硬度":"L","强度":"中","线速度":"26m/s","最高转速":"25000r/min","目数":"240","特殊需求":"金属夹柄长度不低于25mm","执行标准":"GB/T 4127.17-2017","备注":"存在与技术要求不符时，供应商应无条件给予退换货"} |
| 砂瓦 | 150*80*25 | 2000.00 | 块 | {"规格型号":"150*80*25","材质":"白刚玉","外径/长度":"150mm","内径/宽度":"80mm","高度":"25mm","结合剂":"树脂","硬度":"K","强度":"1200r/min","线速度":"35m/s","最高转速":"800r/min","目数":"35*~46*","特殊需求":"砂瓦表面不允许有明显凹凸不平现象,边角不允许碰伤，不允许有裂纹","执行标准":"GB/T 2485-2016","备注":"1.砂轮形状，平型\n2.使用寿命，磨削硬度低的碳素钢、合金钢，每组连续磨削使用寿命不低于6小时\n3.该到货产品与上述要求不符，对该到货产品进行调换或退货"} |
| 橘黄磨头 | 80#/8*16*3 | 2200.00 | 个 | {"规格型号":"80#/8*16*3","材质":"络刚玉+金属柄","外径/长度":"8mm","内径/宽度":"16mm","高度":"40-45mm","结合剂":"氧化铝混合物","硬度":"L","强度":"中","线速度":"26m/s","最高转速":"25000r/min","目数":"80","特殊需求":"金属夹柄长度不低于25mm","执行标准":"GB/T 4127.17-2017","备注":"存在与技术要求不符时，供应商应无条件给予退换货"} |
| 金刚石磨针 | 3*70/220# | 2000.00 | 个 | {"规格型号":"3*70/220#","材质":"金刚砂、金属柄","外径/长度":"Φ3mm","内径/宽度":"金刚砂宽度30mm","高度":"70mm","结合剂":"电镀","硬度":"金刚石绝对硬度10000-2500","强度":"中","线速度":"28m/s","最高转速":"30000r/min","目数":"220#","特殊需求":"磨削H13模具钢","执行标准":"GB/T 16458-2009"} |
| 圆盘砂纸 | 240目/125mm | 6000.00 | 片 | {"规格型号":"240目/125mm","材质":"纸基碳化硅/刚玉","外径/长度":"125mm","目数":"240"} |
| 带柄磨头 | WA20*32*6 | 100.00 | 个 | {"规格型号":"WA20*32*6","材质":"白刚玉+金属夹柄","特殊需求":"外圆:20±1,厚度32±1,金属夹柄直径:6,夹柄长度:不少于28"} |
| 砂布 | S R/R L 210×280 A P1 | 3000.00 | 张 | {"规格型号":"S R/R L 210×280 A P120","材质":"纤维布基,棕刚玉磨料","外径/长度":"280mm","内径/宽度":"210mm","高度":"无","结合剂":"树脂","硬度":"无","强度":"纵向≥15kN/m，横向≥6kN/m","线速度":"无","最高转速":"无","目数":"P120","特殊需求":"砂布页的工作面不允许有砂团、缺砂、缺复胶、胶斑、折印、破裂等缺陷。","执行标准":"JB/T 3889-2006","备注":"1、使用寿命：流程性消耗品。2、按国标规定：型号内S代表砂页；R/R代表全树脂粘合剂；L代表轻型布；A代表棕刚玉磨料；P120代表粒度(目数)。3、验收标准：供货时提供到货清单和合格证；到货如与技术要求不符，厂家无条件免费退换货。"} |
| 投标厂商资质 | |||
| 注册资金 | 专业资质 | ||
| 公司业绩 | |||
| 相关认证 | |||
| 其他 | |||
| 联系我们 | |||
| 供应采购电话 | 0535-****706 | ||
| 地址 | ****工业园**集团总部办公楼 | ||
招标进度跟踪
2026-01-01
招标公告
砂带、磨头等磨具类物资
2026-01-01
招标公告
砂带、磨头等磨具类物资
当前信息
招标项目商机
暂无推荐数据
400-688-2000
欢迎来电咨询～
