开启全网商机
登录/注册
橡胶密封
招标详情
下文中****为隐藏内容，仅对千里马会员开放，如需查看完整内容请
「注册/登录」或 拨打咨询热线：
400-688-2000
| 招标单位 | 氧化铝 | 项目名称 | 橡胶密封 |
| 招标邮箱 | zhaobiao@nanshan.****.cn | 联系人及电话 | 王其新185****6628崔长踪133****3487 |
| 质保期 | 报名截止日期 |
| 项目保证金 | 2000.00元 | 账户名称 | **新南****公司 |
| 账号 | 233****12142 | 开户行 | 中国银行****支行 |
| 备注 | |||
| 备注：竞价****公司转账，不支****银行柜台现金转账。 | |||
| 标书联系人 | 无 | 办公电话 | 无 |
| 邮件 | 无 |
| 账户名称 | 无 | 账号 | 无 |
| 开户行 | 无 | 行号 | 无 |
| 标书收费标准 | 地址、电话 | 无 | |
| 备注：****公司转账，不支****银行柜台现金转账。注明标书费的用途或投标项目名称。 | |||
| O型密封圈 | 39*3.1 | 200.00 | 个 | {"规格型号":"39*3.1","内径":"Φ32.8mm","外径":"Φ39mm","丝径":"Φ3.1mm","材质":"氟橡胶","硬度要求":"75-90A","工作温度":"＞200℃","使用寿命":"≥3个月天","参照标准":"GB/T 3452.1-2005","备注":"验收标准：随货附产品合格证，不符合技术要求予以退换货处理，产生费用由供货厂家承担。"} |
| 下料气缸密封圈 | 63*53*6 | 600.00 | 个 | {"规格型号":"63*53*6","内径":"Φ53mm","外径":"Φ65mm","密封圈高度":"6mm","唇口高度":"/mm","唇形":"/","材质":"氟胶","工作温度":"耐高温200℃","使用寿命":"高温季节60~90，其它季节120~150天","参照标准":"GB/T 10708.2-2000","备注":"1、外观完好无破损，厚度均匀，边缘无毛刺；\n2、如与技术要求不符，执行退换货处理，所产生的费用由供应闪承担。"} |
| 活塞杆密封圈 | QYd40 | 200.00 | 个 | {"规格型号":"QYd40","内径":"Φ0","密封圈高度":"0","材质":"聚氨酯","使用寿命":"＞6个月","参照标准":"GB/T 10708.2-2000"} |
| 打壳气缸防尘圈 | d40 | 200.00 | 个 | {"规格型号":"d40","内径":"Φ40mm","密封圈高度":"0","材质":"无要求","工作温度":"150-200度℃","使用寿命":"6个月"} |
| 骨架油封 | 110*140*12 | 4.00 | 个 | {"规格型号":"110*140*12","内径":"Φ110mm","外径":"Φ140mm","高度":"12mm","骨架材质":"优质碳素结构钢（08F）","密封材质":"FKM","结构形式":"双唇油封","工作温度":"-15~120℃","使用寿命":"180天","参照标准":"GB/T 9877-2008","备注":"1、备件外观包装良好，油封整体平整光滑，无裂边毛刺凹凸现象，各项加工尺寸符合技术要求，否则进行退换货处理，因此产生的损失由供货商承担。\n2、备件到货附带出厂产品合格证及材质检验报告"} |
| 橡胶块 | 200*135*100 | 110.00 | 个 | {"规格型号":"200*135*100","高度":"100mm","外径":"0mm","内孔":"无","材质":"天然橡胶","振幅":"3-5mm","振动频率":"25-33HZ","所属主机":"成型机F2002-10-71","使用寿命":"≥365天","参照标准":"HG/T 3080-2009","备注":"长度200mm，宽度135mm，高度100mm，公差±2mm\n验收标准：随货附产品合格证，不符合技术要求予以退换货处理，产生费用由供货厂家承担。"} |
| 胶管总成 | M38*1000 | 30.00 | 根 | {"型号":"M38*1000","材质":"线筋橡胶编制","内径":"Φ38mm","外径":"Φ51mm","高度":"1000mm","颜色":"黑色","使用介质":"压缩空气","工作压力":"0-1Mpa","参照标准":"JB/T 6143.2-2024","备注":"使用寿命≥2年\n到货验收标准:1.包装完好,内部备件无破碎和损坏.2.型号,参数等必须符合技术要求.3.升级型号的或替代型号的备件应带有升级或替代证明.4.若不符合技术要求或出现质量问题,则退换货,产生的费用由供货方承担."} |
| 橡胶管 | 桅55*20m | 40.00 | 米 | {"型号":"Φ55*20m","材质":"天然橡胶","内径":"Φ55mm","外径":"Φ65mm","高度":"20000mm","颜色":"黑色","使用介质":"空气","工作压力":"0~0.5Mpa","参照标准":"GB/T 1186-2016","备注":"1、使用寿命：≥365天。2、耐温：-10~80℃。3、验货标准：到货物资与技术要求不符时，供应商无条件予以退换货处理"} |
| 橡胶管 | DN116 | 50.00 | 米 | {"型号":"DN116","材质":"天然橡胶","内径":"Φ116mm","外径":"Φ136mm","高度":"20000mm","颜色":"黑色","使用介质":"气体","工作压力":"0.2-0.5Mpa","参照标准":"GB/T 1186-2016","备注":"1、使用寿命：≥365天。2、壁厚：≥10mm。3、耐温要求：-10-80℃。4、特殊要求：橡胶管内部应有夹线。5、验货标准：到货物资与技术要求不符时，供应商无条件予以退换货处理。"} |
| 线编高压风管 | 桅19 | 1500.00 | 米 | {"型号":"Φ19","材质":"线编/橡胶","内径":"Φ19mm","外径":"Φ28mm","高度":"0mm","颜色":"黑色","使用介质":"空气","工作压力":"0-1.6Mpa","参照标准":"GB/T 1186-2016","备注":"使用寿命：≥60天，压力要求：0-1.6兆帕，内径：19mm，外径：28mm验收:到货不合格供应商必须无条件退货或换货处理,所产生的费用由供货方承担，"} |
| 胶管总成 | M18*1.5*1400 | 800.00 | 根 | {"型号":"M18*1.5*1400","材质":"线筋橡胶编制","内径":"Φ9mm","外径":"Φ18mm","高度":"1400mm","颜色":"黑色","使用介质":"压缩空气","工作压力":"0~1Mpa","参照标准":"JB/T 6143.1-2024","备注":"使用寿命≥180天\n验收标准:1需带合格证,到货时包装完，无锈蚀现象,规格型号尺寸相符，一层纤维增强层\n2接头：D型直通活接头，内螺纹M18*1.5、如到货与技术要求不符,由供应商无条件进行退,换货处理，产生费用由供货厂家承担。"} |
| O型密封圈 | 桅192.6*5.5 | 200.00 | 个 | {"规格型号":"Φ192.6*5.5","内径":"Φ192.6mm","外径":"Φ198.1mm","丝径":"Φ5.5mm","材质":"硅橡胶","硬度要求":"70±5度","工作温度":"-40℃―+260℃℃","使用寿命":"≥6个月天","参照标准":"GB/T 3452.1-2005","备注":"设备厂家： ******公司\n设备名称： 铸造盘\n设备型号：Φ152\n拉伸强度（MPa）：≥11 % \n拉断伸长率：≥20%\n密度（g/cm3±0.02）：1.35\n压缩变形：（180℃*22h）18%\n阿克隆磨耗：0.23m3\n老化试验：180℃测试24小时无变化\n使用寿命：正常使用≥6个月\n要求：产品表面要光洁、无凹坑、无飞边、耐油、耐高温、耐酸碱、密封性好\n产品运输，贮存过程中应防过度挤压、碰撞，产品性能达不到要求，厂家20天内无偿退换货，产生的费用由厂家自行承担"} |
| 橡胶软连接 | DN300/PN10 | 6.00 | 个 | {"规格":"DN300/PN10","类型":"双法兰橡胶软连接","公称直径":"300mm","连接形式":"法兰连接","材质":"橡胶材质：丁晴橡胶；法兰材质：Q235B","工作压力":"1.6MPa","工作温度":"0--100℃","介质":"水","法兰尺寸":"内径：300(mm) 、外径：440(mm)；****中心圆直径400(mm) 螺栓孔径23(mm) 螺栓数量12个mm","使用寿命":"≥730天","参照标准":"GB/T 26121-2010","备注":"橡胶接头规格参数：公称通径：300mm;长度245mm;轴向压缩:25mm;轴向拉伸：14mm;横向位移：15mm;偏向角度：15℃\n验收标准:包装完好,备件无划伤/破损及凹凸不平现象,到货需附带材质检测报告/出厂合格证,如不符合技术要求,退换货处理,产生费用由供货方承担."} |
| 耐碱胶条 | 桅12 | 130.00 | 米 | {"规格型号":"Φ12","直径":"12mm","上宽度":"0mm","下宽度":"0mm","高度":"0mm","材质":"**乙丙橡胶","工作温度":"130±10℃℃","工作介质":"水、油","使用寿命":"≥180天","特殊要求":"耐酸碱、耐高温","参照标准":"GB/T 3672.1-2002","备注":"1、要求：表面光滑无凹坑、无飞边、耐油、耐高温、耐酸碱、密封性能好\n2、不合格品处理标准：当验收不符合技术要求时，供货商必须更换合格产品"} |
| 缓冲垫 | 内径":"Φ38mm","外径":"Φ7 | 500.00 | 个 | {"内径":"Φ38mm","外径":"Φ71mm","厚度":"17*10mm","材质":"聚氨酯","使用寿命":"≥90天","参照标准":"GB/T 4323-2017","备注":"验收标准:到货需带合格证,表面无破损及毛边,如到货与技术要求不符厂家应给予退货或换货."} |
| 耐碱真空胶管 | DN360*620 | 3.00 | 根 | {"型号":"DN360*620","材质":"胶管：**乙丙橡胶，弹簧骨架：碳素弹簧钢","内径":"Φ360mm","外径":"Φ386mm","高度":"620mm","颜色":"黑","使用介质":"高温碱液","工作压力":"1.6Mpa","参照标准":"GB/T 3672.1-2002","备注":"具体数据以现场实际为准，如所供物资不符合技术要求，供货厂家负责免费退换货"} |
| 高弹橡胶板 | 3mm | 250.00 | 千克 | {"规格型号":"3mm","厚度":"3mm","宽度":"1000mm","材质":"**乙丙橡胶","耐油性能":"不耐油","硬度要求":"H4~H6","抗撕裂性能":"Ts","拉断强度":"5Mpa","拉伸强度":"≥4Mpa","使用寿命":"730天","特殊要求":"表面应平滑，不允许有疙瘩、裂缝、气泡，外来杂质和其他对使用有影响的缺陷","参照标准":"GB/T 5574-2008","备注":"发现所供备件不符合本要求，供应商应无条件更换符合技术要求的备件"} |
| 橡胶板 | 5mm | 1900.00 | 千克 | {"规格型号":"5mm","厚度":"5mm","宽度":"1000mm","材质":"丁苯橡胶","耐油性能":"C类","硬度要求":"H6","抗撕裂性能":"TS","拉断强度":"1.5","拉伸强度":"0.4","使用寿命":"365天","特殊要求":"耐酸碱腐蚀,厚度偏差±0.2mm","参照标准":"GB/T 5574-2008","备注":"验收标准:到货需带合格证,到货应无破损及划痕,如到货不满足要求厂家无条件给予退货换货."} |
| 椭圆型金属环垫 | DN150/PN110 | 20.00 | 片 | {"规格型号":"DN350","环宽":"15.5mm","环高":"24mm","材质":"316","特殊要求":"1、在环垫外侧面刻印规格型号；2、垫片做防磕碰处理","参照标准":"GB/T 9128.1-2023","备注":"公称直径：350mm；公称压力：10.0MPa。\n 介质：氧化铝矿浆；运行温度：300℃。\n 使用寿命：＞365天\n 验收标准：1、附带产品合格证及材质证明；\n 2、环垫密封面不得有划痕、磕痕、裂纹等影响使用的缺陷，包括运输中产生的缺陷，如有缺陷厂家退换货处理；\n 3、若达不到技术要求，要求厂家退换货，在使用过程中若达不到使用寿命，要求厂家赔付损失！"} |
| 内环加强缠绕垫 | DN150/PN100 | 30.00 | 个 | {"规格型号":"DN200/PN160","环宽":"15.5mm","环高":"24mm","材质":"304不锈钢","特殊要求":"1、垫片节径275mm；2、使用寿命＞365天；3、环面外侧刻印规格型号","参照标准":"HG/T 20612-2009","备注":"验收标准：1、金属环垫密封面不得有划痕、磕痕、裂纹等影响使用的缺陷，包括运输中产生的缺陷，如有缺陷厂家退换货处理；2、附带产品合格证及材质证明；3、若达不到技术要求，要求厂家退换货，在使用过程中若达不到使用寿命，要求厂家赔付损失！"} |
| 内环加强缠绕垫 | 125*175*4.5 | 40.00 | 个 | {"规格型号":"DN150/PN110","环宽":"11.11mm","环高":"17.46mm","材质":"不锈钢304","特殊要求":"公称压力：11.0Mpa；使用寿命：大于3个月","参照标准":"HG/T 20633-2009","备注":"验收标准：金属环垫密封面不得有划痕、磕痕、裂纹等影响使用的缺陷；附带产品合格证及材质证明，若达不到以上技术要求，要求厂家无偿退换货；在使用过程中达不到使用寿命，要求厂家赔付损失！"} |
| 柔性石墨金属缠绕垫 | 310*380*4.5 | 100.00 | 个 | {"规格型号":"DN150/PN100","公称直径":"150mm","公称压力/最高工作压力":"10.0MPa","材质":"内加强钢圈为304不锈钢，厚度3mm；密封部分为304钢丝和石墨，厚度5mm","内径":"170mm","外径":"206mm","厚度":"5mm","最高工作温度":"400℃","形式":"带内环型缠绕垫","特殊要求":"包装附规格型号","参照标准":"HG/T 20610-2009","备注":"验收标准：1.附产品合格证及材质报告；2.密封面不得有金属毛刺、凹凸不平等缺陷，内环与缠绕部分接触严紧；3.达不到技术要求供货商无条件退换货。"} |
| 耐碱胶条 | 桅6 | 50.00 | 个 | {"规格型号":"125*175*4.5","公称直径":"125mm","公称压力/最高工作压力":"20MPa","材质":"柔性石墨 + 304不锈钢带","内径":"125mm","外径":"175mm","厚度":"4.5mm","最高工作温度":"≤425℃","形式":"基本型","特殊要求":"内加强钢圈为304不锈钢，厚度3mm；密封部分为304钢丝和石墨，厚度4.5mm","参照标准":"HG/T 20610-2009","备注":"验收标准：到货附带合格证，如与技术要求不符，供货商应免费给予退换货处理。"} |
| 耐碱胶条 | 桅4 | 110.00 | 个 | {"规格型号":"310*380*4.5","公称直径":"310mm","公称压力/最高工作压力":"20MPa","材质":"柔性石墨+ 304不锈钢带","内径":"310mm","外径":"380mm","厚度":"4.5mm","最高工作温度":"≤425℃","形式":"基本型","参照标准":"HG/T 20610-2009","备注":"验收标准：到货附带合格证，如与技术要求不符，供货商应免费给予退换货处理。"} |
| 耐碱胶条 | 桅5 | 50.00 | 米 | {"规格型号":"Φ6","直径":"6mm","上宽度":"0mm","下宽度":"0mm","高度":"0mm","材质":"**乙丙橡胶","工作温度":"130±10℃","工作介质":"铝酸钠溶液、液碱","使用寿命":"≥150天","特殊要求":"耐碱度≥180g/L","参照标准":"GB/T 3672.1-2002","备注":"到货验收：\n1、到货时如材质优于本技术要求，质量验收人可予以收货。\n2、耐碱胶条不符合要求，供货厂家免费换货。"} |
| GR型梅花垫 | GR38 | 100.00 | 米 | {"规格型号":"Φ4","直径":"4mm","上宽度":"4mm","下宽度":"4mm","高度":"4mm","材质":"**乙丙橡胶","工作温度":"130±10℃","工作介质":"铝酸钠溶液、液碱、水","使用寿命":"≥150天","特殊要求":"耐酸碱、耐高温","参照标准":"GB/T 3672.1-2025","备注":"到货验收：附带产品合格证,1、到货时如材质优于本技术要求， 质量验收人可予以收货。2、耐碱胶条不符合要求供货厂家免费换货。"} |
| 梅花垫 | 70*138*26 | 100.00 | 米 | {"规格型号":"Φ5","直径":"5mm","上宽度":"0mm","下宽度":"0mm","高度":"0mm","材质":"**乙丙橡胶","工作温度":"130±10℃","工作介质":"铝酸钠溶液、液碱、水","使用寿命":"≥150天","特殊要求":"耐酸碱、耐高温","参照标准":"GB/T 3672.1-2002","备注":"到货验收：\n1、到货时如材质优于本技术要求，质量验收人可予以收货。\n2、耐碱胶条不符合要求，供货厂家免费换货。"} |
| 耐碱胶条 | 桅7 | 100.00 | 个 | {"规格型号":"GR38","外径":"80mm","内孔直径":"38mm","厚度":"22mm","瓣数":"8","爪瓣形状":"GR型","材质":"聚氨酯","使用寿命":"180天","参照标准":"GB/T 5272-2017","备注":"到货需付带合格证,若尺寸或质量出现问题进行退换货处理"} |
| 耐碱胶条 | 桅8 | 100.00 | 个 | {"规格型号":"70*138*26","外径":"138mm","内孔直径":"70mm","厚度":"26mm","瓣数":"10","爪瓣形状":"菱形","材质":"聚氨酯","使用寿命":"1年"} |
| 胶垫 | 300ZGB | 100.00 | 米 | {"规格型号":"Φ7","直径":"7mm","上宽度":"0","下宽度":"0","高度":"0","材质":"**乙丙橡胶","工作温度":"130±10℃℃","使用寿命":"5个月","特殊要求":"耐酸碱、耐高温"} |
| 缓冲垫 | 87*45 | 100.00 | 米 | {"规格型号":"Φ8","直径":"8mm","上宽度":"0","下宽度":"0","高度":"0","材质":"**乙丙橡胶","工作温度":"≥100℃℃","使用寿命":"3个月","特殊要求":"耐酸碱、耐高温","参照标准":"GB/T3672.1-2002"} |
| O型密封圈 | 55*3.1 | 50.00 | 件 | {"规格型号":"300ZGB","内径":"Φ825mm","外径":"Φ925mm","长度":"15mm","材质":"**乙丙","参照标准":"GB/T 3672.1-2002","备注":"存货名称：胶垫\n规格型号：300ZGB\n所属设备名称：二旋给料泵\n所属设备规格：300ZGB\n技术要求：\n1）、工况条件：输送介质氧化铝矿浆；介质温度＞90℃；碱洗时含碱320g/L氢氧化钠；\n2）、规格：300ZGB，泵厂家：**坤腾\n3）、材质：**乙丙\n4）、使用寿命大于6个月\n5）、附带产品合格证和检测报告\n6）、参照标准：GB/T 3672.1-2002\n7）、提供大体尺寸方便供应商报价，供应商中标后需现场测量为准\n护板垫：内径825mm；外径925mm；厚度15mm\t\n到货验收：\n1、材质不符合要求供货厂家免费换货\n2、安装尺寸不合适要求供货厂家免费换货\n3、未达到使用寿命，供货厂家免费更换"} |
| O型密封圈 | 桅265*5.3 | 50.00 | 个 | {"型号":"87*45","图号":"87*45","材质":"丁苯橡胶","所属设备名称":"引风机","设备型号":"Y4-73-22D","设备生产厂家":"四****公司","国产/进口":"国产","使用寿命":"≥180天","特殊要求":"外径87mm，内径45mm","参照标准":"HG/T 3080-2009","备注":"验收标准:到货与技术要求不符时,供应商无条件退换货处理。"} |
| 椭圆型金属环形垫 | DN350 | 300.00 | 个 | {"规格型号":"55*3.1","内径":"Φ55mm","外径":"Φ61.2mm","丝径":"Φ3.1mm","材质":"丁腈橡胶","硬度要求":"无","工作温度":"≤100℃","使用寿命":"180天","参照标准":"GB/T 3452.1-2005","备注":"不符合技术要求免费退换货."} |
| 椭圆型金属环垫 | DN200/PN160 | 50.00 | 个 | {"规格型号":"Φ265*5.3","内径":"Φ254.4mm","外径":"Φ265mm","丝径":"Φ5.3mm","材质":"硅橡胶","硬度要求":"40","工作温度":"0~200℃","使用寿命":"120天","参照标准":"GB/T 3452.1-2005","备注":"密度：1.2g/cm3\n拉伸强度Mpa:≥8.0\n伸长率：600%\n要求：产品表面要光洁、无凹坑、无飞边、耐油、耐高温、耐酸碱、密封性好，高弹性\n产品性能达不到要求，厂家20天内无偿退换货"} |
| 投标厂商资质 | |||
| 注册资金 | 专业资质 | ||
| 公司业绩 | 货到付款 | ||
| 相关认证 | |||
| 其他 | |||
| 联系我们 | |||
| 采购咨询电话 | 0535-****706 | ||
| 地址 | ******集团总部办公楼 | ||
招标进度跟踪
2026-08-03
招标公告
橡胶密封
当前信息
标书代写
招标项目商机
暂无推荐数据
400-688-2000
欢迎来电咨询～
