中海炼化-大榭石化芳烃卧螺离心机采购公告

招标项目名称：中海炼化-大榭石化芳烃卧螺离心机采购

Project Name: Procurement of Aromatic Horizontal Decanter centrifuges for CNOOC Refining Chemicals - Daxie Petrochemical

招标编号：****

Bid No.：****

日期：2026年8月18日

Date :August 18, 2026

****（以下称为“招标代理机构”），****集团****公司，受****公司（以下称为“招标人”）委托，就****所需部分货物及相关服务进行国际公开招标。现邀请投标人对下列货物和服务提交电子密封投标：

Sinochem Construction International Tendering Co., Ltd. (hereinafter referred to as the "Tendering Agency"), a wholly-owned subsidiary of China National Offshore Oil Corporation, has been entrusted by CNOOC Ningbo Daxie Petrochemical Co., Ltd. (hereinafter referred to as the "Tenderer") to conduct an international open tender for certain goods and related services required by CNOOC Ningbo Daxie Petrochemical Co., Ltd. Bidders are now invited to submit sealed electronic bids for the following goods and services:

1. 招标条件 Preconditions for Solicitation

项目概况：****（以下简称“大榭石化”）60万吨/年芳烃装置采用由美国LUMMUS公司成套转让的专有结晶技术工艺包，其中PX分离部分采用BP公司两段重浆化结晶分离工艺，异构化采用BP公司的ALP-1602Mp和AMSAC-3202脱乙基型催化剂，二甲苯分馏采用与结晶工艺配套的分馏工艺，分别通过气相和液相两种侧线采出方式为结晶单元和歧化装置切割出满足进料要求的合格原料。配套的制冷系统主要包括乙烯制冷机组和丙烯制冷机组，目的是为结晶过程提供不同温位的冷量。本次采购的卧螺离心机为芳烃装置的关键设备。

Project Summary：CNOOC Ningbo Daxie Petrochemical Co., Ltd. (hereinafter referred to as "Daxie Petrochemical") utilizes a proprietary crystallization technology process package transferred in full by LUMMUS, USA, for its 600,000 tons/year aromatics unit. The PX separation section employs BP's two-stage heavy slurry crystallization separation process, while the isomerization utilizes BP's ALP-1602Mp and AMSAC-3202 deethylated catalysts. The xylene fractionation utilizes a fractionation process that complements the crystallization process, providing qualified feedstock for the crystallization unit and disproportionation unit through gas and liquid phase side-draw methods. The supporting refrigeration system mainly includes ethylene and propylene refrigeration units, aimed at providing cooling at different temperature levels for the crystallization process. The decanter centrifuge purchased this time is a key equipment for the aromatics unit.

资金到位或资金来源落实情况：已落实。

Fund availability or the status of fund source confirmation: Confirmed.

项目已具备招标条件的说明：已具备。

Statement on whether the Project is ready for solicitation: Ready.

2. 招标内容 Subject Matter of Procurement

货物名称：卧螺离心机

Name of Goods: Decanter centrifuge

数量：1台套

Quantity: 1 set

主要技术规格：卧螺筛网沉降式、变频电机+变频控制、总进料量201.744t/h（设计余量10%）、转鼓直径约1150mm、转鼓总长约4025mm。

Main Specifications: Horizontal spiral screen mesh sedimentation type, variable frequency motor + variable frequency control, total feed rate of 201.744 t/h (with a design margin of 10%), drum diameter of approximately 1150 mm, and total drum length of about 4025 mm.

★交货期：

Delivery Schedule:

从中华人民**国关境内提供的货物：不晚于合同签订后6个月（货到项目现场时间）

For Goods to be offered and supplied from within PRC customs territory:No later than 6 months after the contract is signed (arrival date to the job site)

从中华人民**国关境外提供的货物: 不晚于合同签订后5个月（提单发货时间）

For Goods to be offered and supplied from outside PRC customs territory: No later than 5 months after the contract is signed(departure date on Bill of Lading)

★交货地点Destination of delivery:

从中华人民**国关境内提供的货物：**省****开发区大榭石化指定地点

For Goods to be offered and supplied from within PRC customs territory: Designated location of Daxie Petrochemical, Daxie Development Zone, Beilun District, Ningbo City, Zhejiang Province

从中华人民**国关境外提供的货物: CIF中国****港

For Goods to be offered and supplied from outside PRC customs territory: CIF (Ningbo Zhoushan Port, China)

3. 对投标人的资格和业绩要求

Requirements for Qualifications and the Past Performance of the Bidder:

（1）★资格要求Requirements for Qualifications of the Bidder

A. 如果投标****公司，投标人需具有合法有效的企业法人营业执照、税务登记证及组织机构代码证或证照合一的营业执照，投标时需提供原件扫描件（原件备查）；

If the Bidder is a company registered within the territory of China, it shall possess a legally valid Business License of an enterprise legal person, Tax Registration Certificate, and Organizational Code Certificate, or a unified business license combining these certificates. When submitting the bid, the Bidder shall provide a scanned copy of the original document (with the originals kept available for verification).

如果投标****公司，****公司登记注册证明；

If the Bidder is a company registered outside the territory of China, it shall provide a valid certificate of company registration.

****公司的，需具有合法有效的营业执照（境内注册）/公司登记注册证明（境外注册）和上级法人单位****公司投标和签订合同），投标时需提供原件扫描件（原件备查）。

If the Bidder is a branch company, it shall possess a legally valid business license (for those registered within China) / certificate of company registration (for those registered outside China) and an authorization letter from the superior legal entity (authorizing the branch to bid and sign contracts). When submitting the bid, the branch shall provide scanned copies of the original documents (with the originals kept available for verification).

B. 本次招标不接受代理商、贸易商投标。投标****制造厂****制造厂****集团****公司）。****制造厂****集团****公司，投标人应提供声明，****制造厂****集团，负责投标货物的销售工作。

This bidding does not accept bids from agents or traders. Bidders must be the manufacturers of the bidding goods (including companies within the manufacturer's group responsible for sales). If the bidder is a company within the manufacturer's group responsible for sales, the bidder shall provide a statement indicating that the bidder and the manufacturer belong to the same group and are responsible for the sales of the bidding goods.

C. 是否接受联合体投标：否

Is any bid by a consortium or a joint venture accepted No.

D. 未领购招标文件是否可以参加投标：不可以

Can a bidder participate in the bidding without purchasing the Solicitation Document No.

（2）★业绩要求Requirement for Bidder's Past Performance:

2014年1月1日至投标截止日（以合同签署时间为准），投标人应具有至少1台应用于低温（或深冷）结晶法制PX工艺路线的卧螺离心机（卧式螺旋卸料沉降离心机）的供货业绩，且均满足单台转鼓直径≥900mm、转鼓总长≥3600mm、工作温度低于-60℃的技术要求。标书代写

同一集团全球范围内不****集团****公司****公司****工厂）制造的所投产品的业绩，视为投标人所投产品的制造商的业绩；投标人应提供说明函，说明本次所投产品的制造商与满足上述业绩要求的产****集团。

From January 1, 2014, to the bid submission deadline (subject to the contract signing date), bidders must have a supply performance of at least one horizontal screw centrifuge (horizontal spiral discharge sedimentation centrifuge) applied to the PX process route using the low-temperature (or deep-cooling) crystallization method, all of which must meet the technical requirements of a single drum diameter ≥900mm, total drum length ≥3600mm, and operating temperature below -60℃.

The performance of the products submitted by different manufacturers (i.e., wholly-owned subsidiaries, holding subsidiaries, or manufacturing plants under the same group) within the same group globally shall be deemed as the performance of the manufacturer of the products submitted by the bidder. The bidder shall provide a letter of explanation stating that the manufacturer of the products submitted this time belongs to the same group as the manufacturer of the products that meet the aforementioned performance requirements.

投标人须提交相关业绩证明文件。业绩证明文件包括但不限于：1）销售合同和 2）到货验收材料。业绩合同应至少涵盖合同签署时间、合同签署页（国内贸易合同应有双方盖章，国际贸易合同应有双方签字或盖章）、货物名称、供货数量、主要技术参数（体现工艺路线、转鼓直径、转鼓总长、工作温度等）。到货验收材料应为收货单据或验收单或入库单或调试验收报告（到货验收材料应有用户签字或盖章）或结算发票。

Bidders must submit relevant performance supporting documents. These documents include, but are not limited to: 1) sales contracts and 2) goods arrival inspection materials. The performance contracts should at least cover the contract signing date, contract signing page (domestic trade contracts should bear the seals of both parties, while international trade contracts should bear the signatures or seals of both parties), goods name, supply quantity, and main technical parameters (indicating process route, drum diameter, total drum length, operating temperature, etc.). The goods arrival inspection materials should be receipts, inspection reports, warehousing records, commissioning inspection reports(the goods arrival inspection materials should bear the signature or seal of the user), or settlement invoices.

若业绩合同为无固定总价协议，除提供协议外，还应提供相应的订单，订单内容或编号应与协议相关联。同一个协议下提供1个或以上的订单均算为1个业绩。

If the performance contract is an agreement without a fixed total price, in addition to providing the agreement, the corresponding order should also be provided, and the order content or number should be associated with the agreement. Providing one or more orders under the same agreement counts as one performance.

未提交业绩证明文件，或通过所提供的业绩证明文件无法认定满足上述业绩要求的，均被视为无效业绩。

Failure to submit performance proof documents, or if the provided performance proof documents cannot be used to confirm that the above performance requirements are met, will be considered as invalid performance.

4. 有兴趣的投标人可通过以下方式获取招标文件

Interested bidders may obtain the solicitation documents through the following method:

从2026年08月18日开始至2026年08月25日止（具体以网站明示时间为准），请登录“中国海油供应链数字化平台系统”(https://bid.****.cn）的“招标公告”页面进行购买。

From 18th August 2026 to 25th August 2026 (subject to the specific time indicated on the website), please log in to the "Bidding Announcement" page of the "China National Offshore Oil Corporation Supply Chain Digital Platform System" (https://bid.****.cn) to make your purchase.

首次登录必须先进行注册（免费），注册方式选择“自主注册公开招标”。选择其他注册方式将导致注册失败。注册成功后，方可购买招标文件。

For the first-time login to the platform, registration is mandatory (free of charge). The registration method must be "自主注册公开招标" (Self-Registration for Public Bidding). Choosing other registration methods will result in a registration failure. Only after successful registration can a bidder purchase the Solicitation Documents.

投标人须在线填写“购买招标文件登记表”，并在线支付标书款。支付成功后，投标人可自行下载招标文件。招标文件每套售价为人民币200元或25美元，售后不退。文件发售费用用于印刷和邮寄招标文件/资格预审文件。有邮寄需求的请在支付时备注收件人相关信息。

The bidder is requested to fill in the "购买招标文件登记表" (Registration Form for Purchasing Solicitation Documents) online and pay the document fee online. After successful payment, the bidder can download the Solicitation Documents by themselves. Each set of the Solicitation Documents is priced at 200 Renminbi yuan or 25 US dollars, and the fee is non-refundable after purchase. This fee is used for printing and mailing the solicitation documents/ pre-qualification documents. For those requiring mailing, please fill in the recipient's relevant information when making the payment.

对于使用美元购买招标文件的投标人，需电汇至以下账号：

For the bidder who purchases the Solicitation Documents in US dollars, it is required to wire transfer to the following account number:

PAYEE：CNCCC INTERNATIONAL TENDERING CO., LTD.

BANK：INDUSTRIAL AND COMMERCIAL BANK OF CHINA, Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch

ACCOUNT：020********17000351

SWIFT CODE: ICBKCNBJBJM

BANK ADDRESS：No. 237 Wangfujing Street, Dongcheng District, Beijing, P.R. China 100006

5. 投标文件的递交 Submission of Bid

投标文件递交截止时间和方式：标书代写

所有投标文件都应附上按规定提交的投标保证金，并于2026年9月8日上午9:00（**时间）前（具体以网站明示时间为准）线上提交至机电产品招标投标电子交易平台（http://www.****.com)。在此时间后收到的投标文件恕不接受。

All bidding documents must be accompanied by the required bid security and submitted online to the Electronic Trading Platform for Bidding of Mechanic and Electronic Products (http://www.****.com) before 9:00 am on 8th September 2026 (Beijing time) (the specific time shall be subject to the time indicated on the website). Bidding documents received after this time will not be accepted.

6. 开标时间Bid Opening Time标书代写

定于2026年9月8日9:00时（**时间）（具体以网站明示时间为准）开标。标书代写

The bid opening is scheduled to take place at 9:00 am on 8th September 2026 (Beijing time) (subject to the specific time indicated on the website).

7. 开标地点Venue for Bid Opening标书代写

机电产品招标投标电子交易平台（http://www.****.com）

Bid opening at: http://www.****.com

8. 招标公告发布媒介Media for the Notice of Procurement (Invitation for Bids)

本次招标公告同时在“中国招标投标公共服务平台”、“机电产品招标投标电子交易平台”和“中国海油供应链数字化平台”上发布。

The Notice of Procurement will be published on the website of the China Tendering Bidding Public Service Platform, Electronic Trading Platform for Mechanical and Electrical Products Bidding and CNOOC Supply Chain Digital Platform at the same time.

9. 注册及评标结果发布Registration and Publication of Bid Evaluation Results

投标人在投标前应在“机电产品招标投标电子交易平台”（或“必联网”http://www.****.com）完成注册及信息核验。评标结果将在“机电产品招标投标电子交易平台”和“中国海油供应链数字化平台”上发布。

Before submitting a bid, bidders shall complete registration and information verification on the Electronic Trading Platform for Mechanical and Electrical Products Bidding (or EBNew: http://www.****.com). The bid evaluation results will be published on the Electronic Trading Platform for Mechanical and Electrical Products Bidding and CNOOC Supply Chain Digital Platform.

10. 联系方式Contact Information:

招标人：****

Procuring Entity (Company/Purchaser): CNOOC Ningbo Daxie Petrochemical Co., Ltd

地址：**省**市大亚湾区石化大道中426号**海油大厦

Address: Huizhou Haiyou Building, No. 426, Shihua Avenue Middle, Daya Bay District, Huizhou City, Guangdong Province

联系人：黄涛

Contact Person: Huang Tao

电话Tel：+86-0752 ****313

电子信箱Email：huangtao10@cnooc.****.cn

招标代理机构：****

Procurement Agency: CNCCC International Tendering Co., Ltd.

地址：**市东**东直门外小街6号海油大厦四层，邮编100027

Address: Floor 4, CNOOC Tower, No. 6 Dongzhimenwaixiaojie, Dongcheng District,Beijing100027, P. R. China

联系人：戴明利

Contact Person: Dai Mingli

电话:+86 10 8452 7960

Tel：+86 108452 7960

电子信箱：daiml2@cnooc.****.cn

Email：daiml2@cnooc.****.cn

11. 异议渠道 Objection Channel

异议/投诉须在“机电产品招标投标电子交易平台”和“中国海油供应链数字化平台”上同时提出。

Objections/Complaints need to be proposed on the “Electronic Trading Platform for Mechanical and Electrical Products Bidding” and CNOOC Supply Chain Digital Platform at the same time.

异议联系人：戴明利

Contact Person:Dai Mingli

电话：+86 10 8452 7960

Tel:+86 108452 7960

投诉受理邮箱：gaoling@cnooc.****.cn

Contact E-mail for Complaint(s)：gaoling@cnooc.****.cn